Monday , June 18 2018
Home / Laser (page 2)

Laser

August, 2016

July, 2016

  • 29 July

    Lasering Engraving Photos with CorelDraw – You must get a good photo

    One of the problems with getting photos from customers is that the quality of the photo is out of our hands. A lot of people do not realize that the success of any photo that is lasered engraved is directly related to the quality of the original photo. The better …

  • 8 July

    LMM-6018 Black Laser Marking Tape

    LMM-6018 is a laser marking tape designed for use on stainless steel, glass, ceramic, ceramic like and porcelain substrates. LMM-6018 can be applied to a substrate, laser marked to bond a portion of the tape to the substrate and then peeled away to leave the mark. LMM-6018 is designed for …

  • 5 July

    Different Jigs

    Here are some different jigs that I have created or used over the years. If you have one send me a photo of it and I will place it here Putter Jig This jigs was for putters Button Jig This jig was for doing button. It was done on cardboard …

  • 5 July

    Creating a Wood Ornament Part 2

    This is a continuation of Part 1 on creating a wood ornament Import in The EPS File Open up CorelDraw and go to FILE (1) IMPORT (2). We are going to import the EPS we created in our previous tutorial. Select the Wolf File You can leave your file type …

  • 5 July

    Creating a Wood Ornament Part 1

    In this tutorial we will look at how to take a photo and create a cutout in an ornament. Our sample is listed below. It was created by Tim Kane. He has done a couple I have seen and I know that there is a number of you that would …

  • 4 July

    Creating a Photo on a Ceramic Tile Using the LMC 6044P Spray

    In this lesson we will look at how we will adjust a photo in CorelDraw so that we can process the photo on a tile tthat was bought from home depot hat is sprayed with the Thermark spray that is designed to mark tile and glass – LMC 6044P. My …

  • 3 July

    ARA 2013 Presentation Lasering Photos

    This is a presentation done at the 2013 ARA Show in Las Vegas   Laser Engraving Photos from Mike Clarke